Search results for "Fluid dynamic"
showing 10 items of 1034 documents
Ultrasonic characterisation of poroux materials
2017
International audience; Acoustic models of the acoustics of porous and perforated media involve a set of physical parameters. Some of the parameters, the tortusity, the viscous and thermal characteristic lengths are defined for a perfect incompressible and inviscid fluid saturating the porous medium. It is shown that ultrasonic propagation in air-saturated materials can be used to determine these parameters. A basic method involving air-coupled ultrasonic transducers is presented. Variants of this method and a practical implementation of one of these is proposed.
Asymmetric boudins as shear sense indicators—an assessment from field data
2003
Asymmetric boudins are potential but problematic shear sense indicators. They can be divided into two groups, with slip on the inter-boudin surface that is either synthetic (S-slip) or antithetic (A-slip) with respect to bulk shear sense. Since both groups have mirror-image symmetry, independent geometric criteria are needed to distinguish them if they are to be used as shear sense indicators. Investigation of asymmetric boudins in trains parallel to the main foliation from the Kaoko Belt in Namibia and elsewhere indicate that the geometry of both groups is in most cases different. Shearband boudins (formed by S-slip) have a long, curved lenticular shape and large relative displacement and …
Numerical study of two-dimensional wet foam over a range of shear rates
2017
The shear rheology of two-dimensional foam is investigated over a range of shear rates with the numerical DySMaL model, which features dynamically deformable bubbles. It is found that at low shear rates, the rheological behavior of the system can be characterized by a yield stress power-law constitutive equation that is consistent with experimental findings and can be understood in terms of soft glassy rheology models. At low shear rates, the system rheology is also found to be subject to a scaling law involving the bubble size, the surface tension, and the viscosity of the carrier fluid. At high shear rates, the model produces a dynamic phase transition with a sudden change in the flow pat…
Polymeric scaffolds prepared via Thermally Induced Phase Separation (TIPS): Tuning of structure and morphology
2007
Scaffolds suitable for tissue engineering applications were prepared by Thermally Induced Phase Separation (TIPS) starting from a ternary solution PLLA/dioxane/water. The experimental protocol consisted of three consecutive steps, a first quench from the homogeneous solution to an appropriate demixing temperature (within the metastable region), a holding stage for a given residence time and a final quench from the demixing temperature to a low temperature (within the unstable region). A large variety of morphologies, in terms of average pore size and interconnection, were obtained upon modifying the demixing time and temperature, owing to the interplay of nucleation and growth processes dur…
Transition to turbulence in toroidal pipes
2011
AbstractIncompressible flow in toroidal pipes of circular cross-section was investigated by three-dimensional, time-dependent numerical simulations using a finite volume method. The computational domain included a whole torus and was discretized by up to ${\ensuremath{\sim} }11. 4\ensuremath{\times} 1{0}^{6} $ nodes. Two curvatures $\delta $ (radius of the cross-section/radius of the torus), namely 0.3 and 0.1, were examined; a streamwise forcing term was imposed, and its magnitude was made to vary so that the bulk Reynolds number ranged between ${\ensuremath{\sim} }3500$ and ${\ensuremath{\sim} }14\hspace{0.167em} 700$. The results were processed by different techniques in order to confirm…
Hydrodynamics of a three-phase fixed-bed reactor operating in the pulsing flow regime at an elevated pressure
2002
Abstract Results are presented for a three-phase reactor operating at an elevated pressure in the pulsing flow regime. For the system air–water and pressures of 0.1– 0.9 MPa lines are determined that define the change of the hydrodynamic model from the gas continuous flow regime (GCF) to the pulsing flow regime (PF). Also, parameters are found that characterize the pulsing flow of fluids, namely the velocity of pulses travelling along the bed, the frequency of pulsations and their structure, i.e., the length of the pulses and that of the liquid-rich zone.
A Rayleigh-Ritz approach for postbuckling analysis of variable angle tow composite stiffened panels
2018
Abstract A Rayleigh-Ritz solution approach for generally restrained multilayered variable angle tow stiffened plates in postbuckling regime is presented. The plate model is based on the first order shear deformation theory and accounts for geometrical nonlinearity through the von Karman’s assumptions. Stiffened plates are modelled as assembly of plate-like elements and penalty techniques are used to join the elements in the assembled structure and to apply the kinematical boundary conditions. General symmetric and unsymmetric stacking sequences are considered and Legendre orthogonal polynomials are employed to build the trial functions. A computer code was developed to implement the propose…
Drift of ferrocolloids through a cylindrical grid by magnetic force
2011
The subject of the paper is to investigate the coupling phenomena of magnetic and non-uniform temperature fields in ferrofluids. The coupling creates a special kind of mass transfer and an inhomogeneous concentration of ferrofluid arises especially near bodies, where higher field gradients are present. Particular attention is paid to the oriented mass transfer, i.e. the magnitude and direction of ferrofluid flux with respect to the temperature gradient and magnetic field. Quantitatively, oriented phoretic transport can be characterized by the magnetic Soret coefficient and osmotic pressure difference. The problem is solved using two-dimensional (2D) numerical simulations for the periodic st…
Viscous dissipation and thermoconvective instabilities in a horizontal porous channel heated from below
2010
Accepted version of av article from the journal: International Journal of Thermal Sciences. Published version available on Science Direct: http://dx.doi.org/10.1016/j.ijthermalsci.2009.10.010 A linear stability analysis of the basic uniform flow in a horizontal porous channel with a rectangular cross section is carried out. The thermal boundary conditions at the impermeable channel walls are: uniform incoming heat flux at the bottom wall, uniform temperature at the top wall, adiabatic lateral walls. Thermoconvective instabilities are caused by the incoming heat flux at the bottom wall and by the internal viscous heating. Linear stability against transverse or longitudinal roll disturbances …
Do the contact angle and line tension of surface-attached droplets depend on the radius of curvature?
2018
Results from Monte Carlo simulations of wall-attached droplets in the three-dimensional Ising lattice gas model and in a symmetric binary Lennard-Jones fluid, confined by antisymmetric walls, are analyzed, with the aim to estimate the dependence of the contact angle $(\Theta)$ on the droplet radius $(R)$ of curvature. Sphere-cap shape of the wall-attached droplets is assumed throughout. An approach, based purely on "thermodynamic" observables, e.g., chemical potential, excess density due to the droplet, etc., is used, to avoid ambiguities in the decision which particles belong (or do not belong, respectively) to the droplet. It is found that the results are compatible with a variation $[\Th…